Error Code
HL error code — Jacuzzi spa
Always cut power at the breaker before opening the spa pack or touching wiring. Spa equipment runs at 120/240V and can be lethal. If you are unsure, hire a licensed spa technician.
Jacuzzi's HL lockout: hi-limit tripped, usually because flow restriction concentrated heat. Flow first, heat second.
What HL means
High limit triggered — heater locked out.
Diagnose in order
- Check the real water temperature with an external thermometer — the sensor may be lying
- Check whether a pump is running far longer than its programmed cycle
- Test the temperature sensor in the heater — a common, inexpensive failure
- Test the hi-limit sensor — it's separate from the temp sensor
- If the heater keeps running past set point, suspect a stuck heater relay on the board
Likely failed parts
Related codes & guides
Not sure which part failed?
Send us a photo of your spa pack or the failed component and our team will identify the exact replacement.
Upload a Photo