Hot Tub Gaskets, O-Rings, and Pump Seals
A hot tub gasket is the first line of defense between pressurized water and your equipment bay, shell, and electrical components. This collection of seals, gaskets, O-rings and wear rings covers pumps, heaters, light lenses, skimmers and plumbing unions — from brands installed in most major spa makes. If you're chasing a drip, replacing a pump seal, or doing a full equipment refresh, you'll find the exact part here.
How to choose the right seal or gasket
Getting the wrong size is the most common mistake. Before you order, collect these three data points:
- Inside diameter (ID) and outside diameter (OD). O-rings are specified by both. Compare the exact dimensions — a few millimeters off will leak. Examples in this collection range from a 7/16" ID × 5/8" OD o-ring up to a 5-7/8" ID × 6" OD o-ring, so measure before you buy.
- Application type. Heater O-rings and gaskets, like the 4" ID × 4-3/8" OD heater o-ring and the 1-1/2" ID × 2-3/8" OD heater o-ring, are listed separately from light lens O-rings, such as the Light Lens O-Ring 6541-000 and the Sloan LED Light clear O-Ring. Never swap them — confirm each part is listed for your application as well as matching the size.
- Brand and OEM part number. If you have the original part number, search it directly. Gaskets like the O'Ryan Gasket P0070 and the Strip Skimmer Gasket 711-4350 are brand-specific fits. Pump seals — PS-100, PS-1000, PS-2131, PS-2136 — correspond to specific pump models, so match the seal number to your pump model tag.
When the OEM number is unknown, measure the old part with calipers. A worn gasket compresses over time, so measure the groove or mating surface, not the degraded seal itself.
Waterway and Jacuzzi gaskets
For Waterway equipment we list heater gaskets (for example 711-4010), a pump/heater union O-ring gasket (711-6020), an O-ring gasket (711-5120), a strip skimmer gasket (711-4350), and wear rings for Executive and XE2 pumps. For Jacuzzi we list a pump wear ring (10-1462-07), O-rings such as 6500-545, and a Jacuzzi Whirlpool gasket (0199000). Match the part number from your old part where you can. For the pumps these seals fit, see the Waterway pump family.
Brands we carry
- Waterway — heater gaskets and O-rings, a pump/heater union O-ring gasket, an O-ring gasket, a strip skimmer gasket, pump O-rings, and wear rings for Executive and XE2 pumps.
- Balboa / HydroQuip — HydroQuip heater gaskets and a heater gasket kit; Balboa O-rings and a keypad gasket.
- Aqua-Flo by Gecko — O-rings in a wide range of sizes and wear rings, including FMXP2 and FMXP2E wear rings.
- Jacuzzi Whirlpool / Sundance Spas / Hot Spring Spas — OEM-equivalent gaskets and o-rings for three of the largest branded spa lines.
- Sloan — LED lighting components including application-specific clear o-rings for watertight lens seating.
- US Seal — mechanical pump seals in the PS-100, PS-200, PS-201, PS-1000, PS-2131 and PS-2136 series, among others. Match the seal number to your pump model.
- Magic Plastics / CMP / Vico — fitting and plumbing gaskets that match standard spa plumbing sizes.
- Sta-Rite / LX / Rising Dragon — pump and equipment seals for both domestic and import spa platforms.
- Dimension One Spas / Brett Aqualine — a Dimension One lens gasket and Brett Aqualine heater and sensor O-rings.
Common problems this part solves
- Water pooling under the spa or in the equipment bay. The most common source is a failed pump seal or a cracked heater o-ring. See our guide on why your hot tub is leaking from the bottom to trace the source before replacing parts.
- Wet motor or rust on pump housing. A weeping mechanical seal lets water migrate back along the shaft toward the motor. Learn the warning signs in our article on spa pump seal leaks — signs and replacement.
- Light lens flooding or flickering. A degraded lens o-ring lets water into the fixture. The Sloan LED clear o-ring and Light Lens O-Ring 6541-000 are direct fixes.
- Skimmer leaks at the throat. The Strip Skimmer Gasket 711-4350 seals the skimmer face to the spa shell.
- Slow water loss with no visible spray. Heater union o-rings and gaskets are a quiet leak source. The 2" ID × 2-3/4" OD heater gasket is one of the heater gaskets we list.
Frequently asked questions
How do I know if my pump seal needs replacing?
Look for a small drip directly below the pump volute, rust staining on the pump housing, or moisture inside the motor. A failing mechanical seal usually weeps slowly before it fails completely. Catching it early prevents motor damage.
Can I reuse a gasket after I've removed it?
Generally no. Most flat gaskets and o-rings take a compression set once torqued. Reinstalling them increases the risk of an immediate or early-failure leak. Replacement seals are inexpensive compared to the labor of a second repair.
What's the difference between a gasket and an o-ring?
A gasket is typically a flat or profiled piece that seals two mating surfaces under bolt or clamp pressure — common at heaters, skimmers, and unions. An o-ring is a torus (donut shape) that seals by compression into a groove. Both appear throughout spa plumbing and equipment.
Do I need to use thread sealant with these gaskets?
For o-ring face seal connections, a light coat of silicone grease on the o-ring is correct — it lubricates during assembly and prevents tearing. Do not use Teflon tape or pipe dope on o-ring seats. Flat gaskets on unions typically need no additional sealant if the mating surfaces are clean and flat.
How do I measure an o-ring if I don't have the part number?
Use digital calipers to measure the inside diameter (ID) and outside diameter (OD) of the old o-ring. Both appear in every listing title, and the cross-section follows from the two. If the old o-ring is distorted, send us a photo and the part number from the pump or heater and we will confirm the match.
Are spa gaskets affected by chemical levels?
Yes. Consistently high sanitizer levels (especially bromine or chlorine above recommended range) and pH swings accelerate EPDM and rubber degradation. Ozone systems can also shorten o-ring life in certain plumbing configurations. Maintaining balanced water chemistry extends gasket service life.
Related categories
For unions, tailpieces and split nuts that pair with these seals, browse our Spa Unions, Tailpieces & Fittings collection. For the wet end and pump the seal belongs to, see Pump Wet Ends and Main Pumps.























